Page 120. 1953 Lohmann Diesel 18cc engine. SOLD

1953 Lohmann Diesel 18cc engine. WORLDWIDE POSTAGE

This Lohmann, comprising engine and tank, has been restored and is in very good condition.

At the moment it’s unmounted, though I intended to put it onto a period German bicycle in due course.

However, it will be advertised first on ebay as is, so international enthusiasts have the opportunity to buy it with cheaper delivery costs.

I bought it over two years ago, and sold it to my friend. I’m now buying it back in order to offer it here. It has not been run for three years.

This auction is for both the engine and the petrol tank, which will not be sold separately.

lohmannengine1

lohmanntank

***********************************************************************************

The following is taken from The Cyclemaster Museum website http://Cyclemaster.co.uk

Lohmann 18cc ‘Bicycle-Diesel Engine’

0.jpg

The 18cc 2-stroke Lohmann engine was officially described as a ‘mixture compressing self-igniting two-cycle motor.’

It fixes under a bicycle’s pedal crank and operates the rear wheel by roller.

02.jpg

When it originally went on sale in Great Britain, the price was just under £25 10/-

There’s neither carburettor nor ignition system. Instead the engine works on a variable compression ignition system, which is moderated by the twistgrips.

115.jpg

Inventor and designer Hermann Teegen (1899-1962) is the spiritual father of Lohmann engines. He designed several similar engines, 3 of which were patented.

From one of these prototypes, over a period of 3 years, the current 18cc Lohmann engine was developed. It first appeared in 1950.

47.jpg

51,000 were built by August 1954.

75.jpg

Although in test reports of the time, it was specifically pointed out that the engine was not a genuine diesel, Lohmann advertising subsequently marketed it as a ‘bicycle-diesel engine’ (ie ‘Fahrrad-Dielelmotor’ in advertising leaflet below)

55.jpg

The article below appeared in ‘The Guardian’ newspaper.

cucciolo.jpg

l1.jpg

l2.jpg

********************************************************************************

116.jpg

Peter F Vaughan wrote a lucid account of Lohmann ownership in Buzzing magazine, which i have reproduced here:

Eighteen months ago I acquired a Lohmann and ,after very useful initial advice from Marque Enthusiast Phillippa Wheeler, I was soon up and running. Now, after a fair bit of work to the host bicycle, I am registered and legal (thank you for your help, David Casper) and getting about rather more.

As people may know, the 18cc Lohmann engine does not use an electric spark but relies on the heat of compression to ignite the fuel, like a diesel engine. Unlike a diesel, there is no injection equipment. The fuel is mixed with air before it enters the cylinder, so the pressure rises on the compression stroke and it all goes bang as soon as conditions are right. Because of this, the Lohmann has a moveable cylinder head and barrel, allowing the compression ratio to be adjusted on-the-fly as a way of setting the best ignition point. Without a spark, different fuels behave differently and this seems to have started a myth that the Lohmann needs special fuel. I therefore decided to experiment to find what works best. Like many small 2-stroke engines, the Lohmann is lubricated by addition of oil to the fuel which passes all around the engine before ending up in the combustion chamber. I decided to stick to an oil ratio of 1 in 20 as recommended in the instruction book. Modern self-mixing 2-stroke oil works OK. I have tried a proportion of castor oil (the theory being that it is a very ‘forgiving’ lubricant for fast-revving engines) but apart from being expensive, it doesn’t mix very well.

Paraffin works as a base fuel, although Phillippa has found that quality is variable. This is understandable: it is not sold as engine fuel, and so the oil companies don’t have to control the characteristics of auto ignition in a cylinder.

Unleaded petrol (BS 7070), intended for spark ignition engines, has additives to control detonation and this should make it more predictable in its ignition characteristics. Unfortunately, petrol/paraffin is much more free-flowing than paraffin alone, and I found that the Lohmann will not run unless the throttle is nearly closed. Even then there is much 4-stroking (mixture too rich). Above 40% petrol, forget it. Diesel fuel (BS EN590), on the other hand, is more viscous. On pure diesel, the Lohmann will run but power is practically non-existent and the throttle has to be turned to the extra-rich position almost permanently. Interestingly, I have read that heavier hydrocarbons are generally easier to ignite than the more volatile ones because the bigger molecules are less stable when you do get them vaporised.

Using a mixture of the three liquids, I have found a workable mix is 1 part diesel, 2 parts petrol, 4 parts paraffin. The petrol component makes it run smoother than paraffin alone, and the diesel counteracts the decrease in viscosity caused by adding the petrol. This blend is mixed 20:1 with 2-stroke oil. Adding diesel Red-Ex (1cc per litre of mix) seems to make it run better, but more than this makes the engine less flexible and more sensitive to compression setting. The mixture is legal for road use – nearly half has had duty paid, and Customs and Excise allow non-dutied fuels (the paraffin) to be added for engines which will not run satisfactorily on modern fuels.

The Lohmann engine has an adjustable jet needle in the mixing chamber, and mine is currently set with 0.6mm protuding beyond the end of the throttle slide. With the freedom to use different proportions of paraffin, petrol, diesel, maybe heating oil, different needle positions, there’s no way of knowing if all this is anything near optimum, but it is very useable and good enough for me so far. My little Lohmann always cold starts within 10 yards of pedalling off, and after a mile to nurse it up to running temperature it is a reliable if slow power source. I have never experienced any overheating problems – backing compression right off and winding the throttle wide open for a few seconds every mile allows plenty of oil-laden fuel around the engine, cooling and lubricating it.

Hopefully all this may be of interest to anyone who has a Lohmann but is put off by the unfamiliar. Get it out, run it up, and have some fun. I passed a couple of teenage girls in town on their mountain bikes. A bit later, they saw me stopped, posting a letter. “Is that an engine on your bike?” they asked. “Yes,” I said, “Look!” I walked the bike a couple of yards, then lifted the rear wheel as the engine sprang to life and it whirled round. “Cool,” they said.

[original article available on http://www.users.globalnet.co.uk/~pattle/nacc/arc0413.htm%5D

131.jpg

*****************************************************************************

I hope this Lohmann page will pique the interest of vintage enthusiasts sufficiently to contemplate ownership and use of one of these wonderful little engines. They certainly are ‘something different’ but they are nothing to be frightened of.

Why ride the same as everyone else? Live a little …buy yourself a Lohmann!

122.jpg

This page is taken from the Cyclemaster Museum – CLICK HERE www.Cyclemaster.co.uk

lohmann512p-copy

*********************************************************************************

PLEASE READ THIS BEFORE BIDDING

OWNER: BuyVintage Online Auctions

LOCATION: Brighton, E.Sussex, United Kingdom

DELIVERY IS AVAILABLE FOR THIS PARTICULAR AUCTION.

UNLIKE THE OTHER VINTAGE VEHICLES FOR SALE, I’VE NOT MOUNTED THIS ONE INTO A CYCLE.

SO SHIPPING SHOULD BE AN AFFORDABLE OPTION. I WILL POST IT AT COST WORLDWIDE.

PAYMENT: Paypal is okay for cheap items; otherwise deposit only on paypal please.

International purchasers – I do not use paypal.

AFTER PURCHASE: Please email me your phone numbers; I prefer to speak to all purchasers personally.

FEEDBACK: I do everything I can to make your purchase a pleasurable experience. But I only leave feedback when someone has taken the trouble to leave it for me.

VEHICLE CONDITION: Vintage vehicles are wonderful beasts – but each has an individual personality and they sometimes have bad days just like you and me.
You will need basic mechanical skills (or a local mechanic) to use one on a regular basis.
2-Stroke engines – and cyclemotors in particular – are notoriously unreliable. Basic servicing is generally required if unused for even a few weeks.

These are rare vehicles whose values are not necessarily based on running order.
Unless an auction description specifically states that the vehicle is running, THE VEHICLE IS SOLD FOR RESTORATION.

IF YOU DO NOT AGREE WITH THE ABOVE, PLEASE DO NOT BID.

********************************************************************************************

If you have any questions about this (or any other vehicle in these BuyVintage Online Auctions),
you can contact Colin in our Customer Service Department between 9am and 7pm daily:

By Phone – (UK 0044) 07866-126469

By email – Buyvintage@mac.com

The Auction Catalogue is our website –

http://www.BuyVintage.co.uk

*************************

TO RETURN TO THE MAIN PAGE

to see what’s currently being sold

PLEASE CLICK HERE – http://buyvintage.co.uk/

width="651"

Published on May 22, 2008 at 6:28 pm  Leave a Comment  

The URI to TrackBack this entry is: https://buyvintage1.wordpress.com/page-120-1952-bsa-b31-350cc/trackback/